Dragon NaturallySpeaking 12 Administrator Guide - Nuance

Chapter 5: Installing Dragon using the Windows installer (MSI)
you plan to upgrade. Copy the Dragon 10.x or 11.x Master Roaming User Profiles from the network
location to this directory.
7. On the administrator system where you upgrade the Master Roaming profiles to Dragon NaturallySpeaking
, start Dragon and make sure the Roaming feature is turned off.
To turn off the Roaming feature:
n Close any open User Profiles.
n Click Tools > Administrative Settings on the menu to display the Administrative
Settings dialog box.
n On the Roaming tab, make sure Enable is not selected.
8. Close Dragon.
9. On the computer where both the 10.x or 11.x Master Roaming profiles and Dragon NaturallySpeaking
are installed, select Start > Programs > Dragon NaturallySpeaking 12.0 >
Dragon NaturallySpeaking Tools > Upgrade User Profiles. The User Profile Upgrade Wizard
opens.
If you do not turn off the Roaming feature in the Administrative Settings dialog box before
attempting to start the User Upgrade Wizard, you see an error message stating that you cannot
upgrade a Roaming User Profile. If you see the message, go back to the Administrative Settings
dialog and make sure the Enabled check box is not checked.
10. On the Select the profile(s) to upgrade page, click Browse to add a profile to select the
location of the Dragon 10.x or 11.x Master Roaming User Profiles. The Select the profile(s) to
upgrade page now displays a list of User Profiles in the selected directory:
177