Dragon NaturallySpeaking 12 Administrator Guide - Nuance

Dragon 12 Administrator Guide
304
n If you type a letter key (A-Z), the system automatically adds "Ctrl+Alt" as a modifier.
n If you type a digit (0-9), the system adds "Shift+Alt" as a modifier.
n Support is present for the Ctrl and Alt modifiers for all keys; Shift can only be allowed with
another modifier, followed by a letter or digit key. For example, you can assign
“{Shift+Extended -},” but not “{Shift -}.
n It is not possible to assign key sequences for mouse control features, or map the predefined
mouse buttons. However, you may modify the mouse speed by changing the Mouse settings in
the Windows Control Panel.
n If you use the PowerMic II Button Control application on a computer where Dragon is
installed, you will receive a warning if you try to assign a key sequence that is already assigned in
Dragon.
n The PowerMic II Button Control application will not run if an installation of Dragon other than
Dragon NaturallySpeaking is running on the local computer. In this case, the end-user will
receive a warning.
n You can assign a key sequence for:
l The Scan button, located on the under-side of the PowerMic II
l The Tab and Enter keys