Dragon NaturallySpeaking 12 Administrator Guide - Nuance

Options Description
SERIALNUMBER=abcde-fghijkl-mnop-qr
PRODUCTUPDATEFLAG=0
(or 1 or –1)
Chapter 5: Installing Dragon using the Windows installer (MSI)
Copy the nsdefaults.ini file created by this
installation of Dragon to a separate location.
By default, the nsdefaults.ini is located in:
C:\Documents and Settings\All
Users\Application Data\N-
uance\NaturallySpeaking12\
Use the copied nsdefaults.ini as the input
for the DEFAULTSINI option.
A serial (license) number is required for all
installations. You must specify a valid serial
number on the command line.
Note: Specifying a serial number on the command
line does not bypass the serial number
checking within setup.
Sets the default state of the product update
check box at the end of installation, to indicate
whether the installation should automatically
check the web for product updates.
Automatic product updates are not supported
for enterprise installations.
A value of 0 (zero) turns the check box off
by default, 1 (one) turns it on by default.
To disable the option entirely (turn the
option off and suppress the display of the
check box altogether), set the value to –1.
The default setting is 1 (enables the check
box and checks for product updates by
default).
SETDEFAULTS=0 (or 1) If set to 1, sets the default state of Modify
the application’s settings for all users
check box to display the Options dialog box
at the end of the installation. The Options
dialog box lets you change Dragon’s standard
behavior, including specifying hot keys, customizing
how text is formatted, changing initial
microphone settings, and setting the how
often your User Profiles are backed up.
Applies only if your installation displays the
Installation Wizard.
A value of 0/1 will turn check box off/on
accordingly.
195