DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

•Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and
then on.
Values:
NOTE:
LPD Disable Disables the Line Printer Daemon (LPD) port.
Enable* Enables the LPD port.
Port 9100 Disable Disables the Port 9100 port.
Enable* Enables the Port 9100 port.
WSD Disable Disables the WSD port.
Enable* Enables the WSD port.
SNMP Disable Disables the Simple Network Management Protocol (SNMP)
UDP port.
Enable* Enables the SNMP UDP port.
StatusMessenger Disable Disables the StatusMessenger feature.
Enable* Enables the StatusMessenger feature.
CentreWare Disable Disables an access to CentreWare Internet Services
Internet Services
embedded in the printer.
Enable* Enables an access to CentreWare Internet Services
embedded in the printer.
LLTD Disable Disables the LLTD.
Enable* Enables the LLTD.
Bonjour(mDNS) Disable Disables the Bonjour (mDNS).
Enable* Enables the Bonjour (mDNS).
• WSD stands for Web Services on Devices.
• Initialize NVM
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). After executing this function and
rebooting the printer, all wired network settings are reset to their default values.
Values:
Yes Initializes the wired network data stored in NVM.
No* Does not initialize the wired network data stored in NVM.
Fax Settings (DocuPrint M205 f/M205 fw Only)
Use the Fax Settings menu to configure the basic fax settings.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Using the Operator Panel Menus and Keypad 322