DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

The Output Is Too Light
NOTE:
Problem Action
The output is too light. The toner cartridge may be low or need to be replaced. Confirm the
amount of toner in the toner cartridge.
1 Check the toner level in the Consumables tab in the Printer
Status window of the SimpleMonitor.
2 Replace the toner cartridge as necessary.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
381 Troubleshooting
See also:
• "Usable Print Media" on page 144
Try changing the Paper Type setting in the print driver.
1 On the Paper/Output tab in Printing Preferences of the print
driver, change the Paper Type setting.
Disable Toner Saving Mode in the print driver.
1 On the Graphics tab in Printing Preferences of the print driver,
ensure that the Toner Saving Mode check box is not selected.