DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

Job Tone Off Does not emit a tone when a job is complete.
Low
Medium*
High
Emits a tone at the specified volume when a job is complete.
Alert Tone Off Does not emit a tone when a problem occurs.
Low
Medium*
High
Emits a tone at the specified volume when a problem occurs.
All Tones Off Disables all the alert tones.
Low
Medium
High
Sets the volume of all the alert tones at once.
• mm / inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)* Specifies the default measurement unit.
Inches (")
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off Does not show the alert message when the toner is low.
On* Shows the alert message when the toner is low.
• Power On Wizard
Purpose:
To perform initial settings for the printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 48
Values:
Yes Performs the initial settings for the printer.
No* Does not perform the initial settings for the printer.
Using the Operator Panel Menus and Keypad 332