DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

Jam Problems
This section includes:
• "Misfeed jam" on page 375
• "Multi-feed jam" on page 375
Misfeed jam
Problem Action
Print media misfeeds occur. Remove the paper from the PSI, and then ensure that the paper is
properly inserted in the MPF.
Depending on the print media you use, take any of the following
actions:
• For thick paper, use the one that is 163 gsm or less.
• For postcard, the one up to 190 gsm is available.
• For thin paper, use the one that is 60 gsm or more.
• For the envelope, ensure that it is properly loaded in the MPF or
the PSI as instructed in "Loading Envelope in the Multipurpose
Feeder (MPF)" on page 153 or in "Loading Envelope in the Priority
Sheet Inserter (PSI)" on page 159
If the envelope is deformed, correct it or use another envelope.
If performing manual duplex printing, ensure that the print media is
not curled.
Fan the print media.
If the print media is damp, turn over the print media.
If the problem continues, use print media that is not damp.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
Multi-feed jam
Problem Action
Print media multiple feeds occur. Remove the paper from the PSI, and then ensure that the paper is
inserted properly in the MPF.
If the print media is damp, use print media that is not damp.
Fan the print media.
(DocuPrint M205 f/M205 fw only) Clear the jam.
A document jam occurs in the
See also:
ADF if scanning of multiple-sheet
document is cancelled while
• "Clearing Paper Jams From the ADF (DocuPrint M205 f/M205
scanning is in progress.
fw)" on page 365
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
375 Troubleshooting