DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

• Max E-Mail Size (DocuPrint M205 f/M205 fw Only)
Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K
bytes. The default is 2048 K bytes.
Fax Defaults (DocuPrint M205 f/M205 fw Only)
Use the Fax Defaults menus to configure a variety of fax features.
NOTE:
• The Fax service cannot be used unless you set up a region code under Region. If Region is not set up, a
message Set The Region Code appears on the LCD panel.
• Values marked by an asterisk (*) are the factory default menu settings.
• Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
NOTE:
Standard* Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Super Fine Suitable for documents containing extremely fine detail. The Super
Fine mode is enabled only if the remote machine also supports the
super fine resolution. See the notes below.
Ultra Fine Suitable for documents containing photographic images.
• Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving device.
• Document Type
Purpose:
To select the default document type.
Values:
Text* Suitable for documents with text.
Photo Suitable for documents with photos.
• Lighten/Darken
Purpose:
To set the default copy density level.
Values:
Lighter2
Lighter1
Makes the fax lighter than the original. Works well with dark print.
Normal* Works well with standard typed or printed documents.
Using the Operator Panel Menus and Keypad 346