DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

Error Code What You Can Do
031-585 Press the button to clear the message. Check if the FTP server encounters any
031-587
delete/write-protection or disk problem.
031-588 Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
031-589 Press the button to clear the message. Check if the storage location has free space.
031-594 Press the button to clear the message. Contact your server administrator to check if
the scanned file has wrong setting while being stored to FTP server. If this does not
solve the problem, contact the Fuji Xerox local representative office or an authorised
dealer.
See also:
• "Online Services" on page 447
031-598 Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
033-503 Press the button to clear the message. Retry, and check the report. Delete the
033-513
unnecessary data stored in the memory.
033-517 Press the
rect.
button to clear the message. Check if the password of the fax lock is cor-
033-518 Press the button to clear the message. Check if your region is set correctly.
033-519 Fax service is locked. To continue, press the button and disable the fax lock.
See also:
• "Limiting Access to Printer Operations" on page 355
033-787 Press the button to clear the message. The job is cancelled.
033-788 Press the button to clear the message. Remove the received fax, or wait for a while
until sending a fax is completed.
034-700 Press the button to clear the message. If the error continues to appear after the
034-701
redial for the specified number of times, try the following:
034-702
• Check if the phone line is connected properly.
• Check if the destination number is correct.
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
405 Troubleshooting
See also:
• "Connecting the Telephone Line" on page 254
034-703 Press the button to clear the message. If the error continues to appear after the
034-704
redial for the specified number of times, try the following:
034-705
034-706
• Check if the phone line is connected properly.
• Check if the destination number is available and correct.
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
See also:
• "Connecting the Telephone Line" on page 254
034-707 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed.