28.03.2013 Views

DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

• Ans Select<br />

Purpose:<br />

To select the default fax receiving mode.<br />

Values:<br />

TEL Mode Automatic fax reception is turned off. You can receive a fax by picking<br />

up the handset of the external telephone, pressing the remote receive<br />

code, and then pressing (Start) button.<br />

FAX Mode* Automatically receives faxes.<br />

TEL/FAX Mode When the printer receives an incoming fax, the external telephone<br />

rings for the time specified in Auto Ans. TEL/FAX, and then the<br />

printer automatically receives a fax. If an incoming call is not a fax,<br />

the printer beeps from the internal speaker indicating that the call is a<br />

telephone call.<br />

Ans/FAX Mode The printer can share a telephone line with an answering machine. In<br />

this mode, the printer will monitor the fax signal and pick up the line if<br />

there are fax tones. If the phone communication is using serial<br />

transmission in your region, this mode is not supported.<br />

DRPD Mode Before using the Distinctive Ring Pattern Detection (DRPD) option, a<br />

distinctive ring service must be installed on your telephone line by the<br />

telephone company. After the telephone company has provided a<br />

separate number for faxing with a distinctive ring pattern, configure<br />

the fax setup to monitor for that specific ring pattern.<br />

• Auto Answer Fax<br />

Purpose:<br />

To set the interval at which the printer goes into the fax receive mode after receiving an incoming call.<br />

The interval can be specified within the range of 0 to 255 seconds. The default is 0 second.<br />

• Auto Ans. TEL/FAX<br />

Purpose:<br />

To set the interval at which the printer goes into the fax receive mode after the external telephone<br />

receives an incoming call. The interval can be specified within the range of 0 to 255 seconds. The<br />

default is six seconds.<br />

• Auto Ans. Ans/FAX<br />

Purpose:<br />

To set the interval at which the printer goes into the fax receive mode after the external answering<br />

machine receives an incoming call. The interval can be specified within the range of 0 to 255 seconds.<br />

The default is 21 seconds.<br />

323 Using the Operator Panel Menus and Keypad

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!