28.03.2013 Views

DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Configuring Wireless Settings (<strong>DocuPrint</strong> <strong>M205</strong> <strong>fw</strong> Only)<br />

You can configure wireless settings through Easy Install Navi.<br />

IMPORTANT:<br />

• The Wireless LAN feature is unavailable depending on the region you purchased.<br />

• Be sure to get the SSID and security information from a system administrator in advance when you use other<br />

than WPS to configure wireless settings.<br />

• Ensure that the Ethernet cable has been disconnected from the printer before you configure the wireless<br />

settings.<br />

The specifications of wireless setting function are described below:<br />

Item Specification<br />

Connectivity Wireless<br />

Connectivity Standard IEEE 802.11b/g compliant<br />

Bandwidth 2.4 GHz<br />

Data Transfer Rate IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps<br />

IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps<br />

Security 64 (40-bit key)/ 128 (104- bit key) WEP, WPA- PSK (TKIP, AES),<br />

WPA2-PSK (AES)(IEEE802.1x attestation function of WPA 1x noncorresponds)<br />

Certifications Wi-Fi, WPA2.0 (Personal)<br />

Wi-Fi Protected Setup (WPS) Push Button Configuration (PBC), Personal Identification Number<br />

(PIN)<br />

You can select a method to configure a wireless setting from the following:<br />

Wizard Setup Through USB Connection<br />

Advanced Setup Through Ethernet connection<br />

Operator Panel<br />

CentreWare Internet Services<br />

WPS-PIN *1<br />

WPS-PBC *2<br />

*1 WPS-PIN (Wi-Fi ® Protected Setup-Personal Identification Number) is a method to authenticate and<br />

register devices required for wireless configuration, by entering PIN code in the printer and computer.<br />

This setting, performed through access point, is available only when the access points of your wireless<br />

router supports WPS.<br />

*2 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register<br />

devices required for wireless configuration, by pressing the button provided on the access point via<br />

wireless routers, and then performing WPS-PBC setting on the operator panel. This setting is available<br />

only when the access point supports WPS.<br />

This section includes:<br />

• "Using Wizard Setup to Configure Wireless Settings" on page 89<br />

• "Using Advanced Setup to Configure Wireless Settings" on page 95<br />

• "Setting up a New Wireless Network Environment for Your Computer (When You Need to Setup<br />

Your Wireless Connectivity With Your Computer)" on page 110<br />

Printer Connection and Software Installation 88

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!