DocuPrint M205 b/M205 f/M205 fw User Guide - Fuji Xerox Printers

Copy Quality Problems
NOTE:
Problem Action
(DocuPrint M205 f/M205 fw only) There is debris on the ADF glass. When scanning, the paper from the
There are lines or streaks in
ADF passes over the debris creating lines or streaks.
copies made from the ADF. Clean the ADF glass with a lint free cloth.
There are spots in copies taken
from the document glass.
The reverse side of the original is
showing on the copy.
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
395 Troubleshooting
See also:
• "Cleaning the Scanner" on page 421
There is debris on the document glass. When scanning, the debris
creates a spot on the image.
Clean the document glass with a lint free cloth.
See also:
• "Cleaning the Scanner" on page 421
On the Copy menu, enable Auto Exposure.
For information on turning Auto Exposure on and off, see "Auto
Exposure" on page 204.
Light colors are washed out or On the Copy menu, disable Auto Exposure.
white on the copy.
For information on turning Auto Exposure on and off, see "Auto
Exposure" on page 204.
Image is too light or dark. Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see
"Lighten/Darken" on page 202.