Welcome to Adams/Solver Subroutines - Kxcad.net

6
Adams/Solver
Subroutine: Does the following:
AKISPL Uses the Akima cubic-curve fitting method to interpolate data specified
in a SPLINE statement.
BISTOP Evaluates a BISTOP function.
CHEBY Evaluates a Chebyshev polynomial.
CUBSPL Uses the traditional cubic-curve fitting method to interpolate data
specified in a SPLINE statement.
ERRMES Allows user subroutines to output information/warning error messages.
FORCOS Evaluates a Fourier cosine series.
FORSIN Evaluates a Fourier sine series.
GETCPU Retrieves the current CPU time.
GETINM Retrieves information as to whether the current Adams/Solver
command input mode is interactive or command file-driven.
GETINT Retrieves the type of integrator used for the current simulation.
GETMOD Returns an integer variable that specifies the current analysis mode.
GETSLV Retrieves the name of the active solver, either HARWELL or
CALAHAN.
GETSTM Retrieves the current simulation time.
GETVER Retrieves the current Adams/Solver version number as it appears in the
Adams/Solver banner.
GTARAY Accesses the double-precision numbers stored by an IC-type ARRAY
statement.
GTCMAT Computes the compliance matrix for a set of markers in an
Adams/Solver model.
GTCURV Evaluates a B-spline or user-written curve that a CURVE statement
creates.
GTSTRG Accesses the character string that a STRING statement stores.
GTUNTS Accesses model unit information from Adams/Solver.
HAVSIN Evaluates a haversine function.
IMPACT Provides a simple contact model.
ISTRNG Converts a number in an integer variable to the characters representing
that number. The character data in ISTRNG is always left justified.
Unused space in ISTRNG is padded with blanks.
MODINF Accesses the original mode numbers and the modal frequencies, in
Hertz, of all active modes associated with a FLEX_BODY statement.