05.04.2013 Views

Freshwater

Freshwater

Freshwater

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 15: Putting It All Together<br />

Setting Up Your Coldwater System<br />

Sure, tropicals are great, but there is a lot of beauty to be found in coldwater<br />

species as well. What follows are the basic steps to set up a coldwater aquarium.<br />

For this example we will be using a bio-wheel and artificial plants<br />

1. Find a good location.<br />

Choose a place that has a solid floor and is away from windows, doors,<br />

and high traffic areas. Make sure that you have adequate electrical outlets<br />

and a handy water supply.<br />

2. Set up the stand.<br />

Place the stand so that it is stable (that is, it doesn’t rock). You can use a<br />

carpenter’s level to accomplish this goal. Lay the level along the length<br />

of the stand to make sure that it is completely level. If not, use hardwood<br />

shims (available at hardware stores) to level the stand by placing them<br />

one at a time under the legs.<br />

Make sure you leave room behind the stand for hanging equipment and<br />

leave enough room for yourself to do cleaning and maintenance.<br />

3. Clean out your tank.<br />

Clean out your aquarium with clear water and a soft sponge. Do not use<br />

soap or other chemicals! Make sure you dry the outside of the glass with<br />

paper towels to avoid streaks that may be hard to reach after the system<br />

is completely set up.<br />

4. Place the aquarium on the stand.<br />

Make sure that the tank fits properly on the stand. Do not allow any of<br />

the tank’s bottom edges to hang over. If you want, you can place a thin<br />

sheet of Styrofoam underneath the tank to cushion it and even out and<br />

minor changes in level.<br />

5. Add a background.<br />

If you want to add a background, now would be the time to tape it onto<br />

the back of the tank so that you don’t have to work it around the equipment<br />

and cords later.<br />

Another option is to paint the back glass on the outside with a roller.<br />

This is a great way to hide any cords or other objects that you don’t<br />

want to show behind the tank. Apply two coats of paint and make sure<br />

that it is completely dry before you continue. Take care not to splash<br />

any paint into the interior of the tank as it can be toxic. We like to use an<br />

ocean blue paint for the back of my tanks, as it allows the fish to show<br />

their true colors and helps reflect lighting.<br />

201

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!