The Turbo Air® 3000 Centrifugal Compressor Compressor Handbook

The Turbo Air 3000 Centrifugal Compressor Operator’s Manual
Daily Inspection
A daily inspection takes only a short time, but it will allow the operator to develop a definite sense of
the appearance, sounds, and other operating conditions of a smoothly performing compressor. Any
changes can be investigated and be given attention before major problems develop. Table 5 – 1 lists
the items that should be monitored daily (or with a shift change).
Daily Operator Inspection Checklist
WARNING: Exercise care when in the vicinity of hot surfaces, pressurized air, and high voltages.
Procedures accompanied by the alert symbol (!) require special precautions as indicated.
Operating Data Log
3 Operating Parameters recorded and within specifications
3 Setpoints recorded
Gearcase (High surface temperatures)
3 External surfaces wiped clean
3 No unusual noise or vibrations
3 No oil leaks
3 No water leaks
3 No frayed or worn electrical cables
Intercoolers and Aftercooler (Pressurized air, high surface temperatures)
3 External surfaces wiped clean
3 Condensate drains functioning properly
3 No cooling water leaks
3 No air leaks
Lubrication System (High voltages at heater, pump motor)
3 External surfaces wiped clean
3 Proper oil level in oil reservoir
3 Proper oil color
3 No mist from ejector system
3 No oil cooler water leaks
3 No oil leaks
3 No frayed or worn electrical cables
Compressor Drive Motor (Inspect visually only—high voltages, temperatures)
3 External surfaces wiped clean
3 Properly ventilated
3 No erratic or noisy operation
3 No frayed or worn electrical cables
3 Inspected in accordance with manufacturer’s recommendations
Table 5—1 Daily Operator Inspection Checklist
5—4