Complete Material Standards Manual - Gainesville Regional Utilities

Marker, Flex-Tough Composite
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
GlasForms Inc. Flex-Tough
Material Description:
Marker is specially designed with a thicker
center for easier installation into hard soil
surfaces. Marker is 3.84" wide x length
required and made of composite fiberglass. The
marker shall be pigmented throughout the entire
cross-section. The Flex-Tough markers come
pointed with a constant I-Beam design with
thicker middle cross section and ready for
installation. Decals are optional and can be
applied at the plant before shipping.
Application:
Used to mark water, wastewater and reclaimed
water pipelines, Installation Tools: GMD400
Post Driver and PHD100 Pilot hole driver for
hard soil conditions. Order with appropriate
decal
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
MARKER, FLEX-TOUGH COMPOSITE
Stock Number Stock Description
000798746 Reclaimed Water
w/decal
000798258 Wastewater - FM decal
000798797 Wastewater- gravity
decal
000798649 Water w/decal
'For GRU use only: An X indicates item is stockless
ASTM D-4476/D-790
National Standards:
ASTM D638/D3916 - Tensile Strength
ASTM D695 - Compressive Strength
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
M-20.00
6/10/2009