Complete Material Standards Manual - Gainesville Regional Utilities

Valve, Gate, Resilient Wedge, MJ x MJ
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
American Flow Control 2500
Clow Valve Company F-6100
Kennedy Valve Co KS-RW 515
M&H Valve Company 4067
Mueller Company A-2360-20
Material Description:
Resilient wedge, ductile iron gate valve shall
have an iron body, bonnet, disc and operating
nut and be fusion bonded epoxy coated (interior
and exterior). The disc shall be fully rubber
(nitrile) encapsulated. Gate valve shall have a
non-rising stem, O-ring seals, 2" square
operating nut, mechanical joint ends and shall
be pressure rated to 250 psi.
Application:
Suitable for use in potable water, reclaimed
water and fire protection systems.
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
VALVE, GATE DI
Stock Number Stock Description
000664057 4"
000565903 6"
000284556 8"
000625507 12"
'For GRU use only: An X indicates item is stockless
National Standards:
ANSI B16-5 - Flange Gaskets
ASTM A307 - Strength Requirements
ASTM A536 - Ductile Iron
AWWA C515 - Valves
NSF 61 - Health Standards
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
V-41.45
6/10/2009