Complete Material Standards Manual - Gainesville Regional Utilities

Valve, Swing Check, FL x FL
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
GA Industries, Inc 250-D
Material Description:
Check valve shall be swing type, gravity
operated, have an iron body and disc, bronze
disc seat, stainless steel hinge pin, and Class
125 flanged ends. Hinge pin shall extend from
both sides of valve so that the lever and weight
can be installed on either side of the valve
without accessing the valve body. Check valve
shall be pressure rated to 175 psi.
Application:
For use in wastewater systems.
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
VALVE, SWING CHECK CI
Stock Number Stock Description
000264407 3"
000862053 4"
000793051 6"
000742309 8"
000028703 10"
'For GRU use only: An X indicates item is stockless
National Standards:
ANSI B16.1 - Flanged Ends & Drilling
AWWA C503 - Lever & Weight Components
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
V-45.00
6/10/2009