Complete Material Standards Manual - Gainesville Regional Utilities

Pipe, PVC, DR-18 (Sewer), Push-On Joint
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
Open Market
Material Description:
Pipe shall be polyvinyl chloride (PVC) pipe,
green C905. Pipe shall be green and pressure
rated as Pressure Class 150 (DR-18). Pipe shall
be provided with integral bell and spigot
gasketed joints. The outside diameter of pipe
shall be ductile iron pipe size.
Application:
For use in all force mains and gravity sewer
systems 20' to 25' in depth. Each pipe shall be
in lengths of 20 foot and provided with gasket
installed. Provide one (1) quart of lubricant
with every seven (7) lengths of pipe.
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
PIPE, PVC DR-18, SEWER
Stock Number Stock Description
000801585 6"
000801631 8"
000801933 10"
000802085 12"
000800333 16"
000801984 20"
000016451 24"
'For GRU use only: An X indicates item is stockless
ASTM D1784 - PVC
ASTM D3139 - Joints
ASTM F477 - Gaskets
National Standards:
AWWA C905 - Pressure Class
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
P-25.10
6/10/2009