Complete Material Standards Manual - Gainesville Regional Utilities

Valve, Plug, Ballcentric, 8" DIA
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
Henry Pratt Company
Material Description:
Ballcentric plug valves shall be of the
non-lubricating, eccentric type and shall be
designed for a working pressure of 175 psi for
8" valves. Valves shall provide tight shut-off
at rated pressure. Round port design,
mechanical joint ends.
Application:
For use in pressurized wastewater systems.
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
VALVE, PLUG, BALLCENTRIC
Stock Number Stock Description
000799424 8"
'For GRU use only: An X indicates item is stockless
ANSI A21.11 - MJ Ends
National Standards:
ASTM A126 - Iron Body (Class B)
ASTM A536 - DI Plug
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
V-43.00
6/10/2009