Complete Material Standards Manual - Gainesville Regional Utilities

Pipe, PVC, DR-25 (Force Main), Push-On Joint
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
Open Market
Material Description:
Pipe shall be polyvinyl chloride (PVC), green
C900. Pipe shall be green and pressure rated as
Pressure Class 100 (DR-25) (diameter 12" and
smaller) or Pressure Class 165 (DR 25) (diameter
larger than 12") . Pipe shall be provided with
integral bell and spigot gasketed joints. The
outside diameter of pipe shall be cast iron pipe
size. Each pipe shall be in lengths of 20 foot
and provided with gasket installed.
Application:
Sewer force main applications/systems. Provide
one (1) quart of lubricant with every seven (7)
lengths of pipe.
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
PIPE, PVC DR-25 FORCE MAIN
Stock Number Stock Description
000096409 4"
000094854 6"
000094706 8"
000094757 10"
000094803 12"
000094552 16"
'For GRU use only: An X indicates item is stockless
ASTM D1784 - PVC
ASTM D3139 - Joints
ASTM F477 - Gaskets
National Standards:
AWWA C900 - Pressure Class
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
P-26.00
6/10/2009