Complete Material Standards Manual - Gainesville Regional Utilities

Pipe, PVC, SDR-35, Push-On Joint
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
Diamond Plastics Corp SANI-21
SDR-35
Material Description:
Polyvinyl chloride pipe (PVC), SDR-35. Pipe
shall be green and produced with wall thickness
corresponding to dimension ratio SDR-35. Pipe
shall be provided with integral bell and spigot
gasketed joints. Provide one (1) quart of
lubricant with every seven (7) lengths of pipe.
Pipes to be 14 ft in nominal length.
Application:
Pipe shall be used in wastewater gravity flow
applications where pipe depth is 14 feet or
less.
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
PIPE, PVC SDR-35
Stock Number Stock Description
000144657 4"
000128155 6"
000119504 8"
000105252 10"
000105309 12"
'For GRU use only: An X indicates item is stockless
National Standards:
ASTM D1784 - Cell Classification
ASTM D3034 - PVC Sewer Pipe
ASTM F477 - Gaskets
ASTM F679 - PVC Sewer Pipe
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
P-28.00
6/10/2009