Complete Material Standards Manual - Gainesville Regional Utilities

Valve, Gate, Resilient, Iron, Thread
Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
American Flow Control 2500
Clow Valve Company F-6103
Kennedy Valve Co KenSeal II
RW
M&H Valve Company 4067
Mueller Company A-2360-8
Material Description:
Gate valve shall be ductile iron, resilient
wedge style. Gate valve shall have an iron
body, bonnet, disc and operating nut and be
fusion bonded epoxy coated (interior and
exterior). The disc shall be fully rubber
(nitrile) encapsulated. Gate valve shall have a
non-rising stem, O-ring seals, 2" square
operating nut, female threaded (NPT) ends and
shall be pressure rated to 250 psi.
Application:
For system shut off/on in potable and reclaimed
water systems with threaded connections.
See Appendix B for Installation Instructions
Pictures are for Illustrative Purposes Only
GRU Stock Information:
VALVE, GATE RS THREADED, DI BODY
Stock Number Stock Description
000095605 2" w/DI Body
000799165 3" w/DI Body
'For GRU use only: An X indicates item is stockless
National Standards:
AWWA C509 - Resilient Seated Gate Valves
AWWA C550 - Epoxy Coating
NSF 61 - Potable Water Systems
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
V-41.30
6/10/2009