Complete Material Standards Manual - Gainesville Regional Utilities

Material Item Approved for Use In:
Water System:
Wastewater System:
Reclaimed Water System:
Approved Manufacturers:
Manufacturer's Name: Model/Series #:
Open Market
Sigma Corp / Russell Pipe DPP
Material Description:
Fitting shall be slip joint ductile iron push-on
style, pressure rated to 350 psi. Fitting shall
have asphaltic seal coat (1-mil, interior and
exterior).
Application:
Plug application for push-on ductile iron pipe
and fitting systems. Insert in bell or manhole
boot.
See Appendix B for Installation Instructions
Plug, DI, Push-On, SJ
Pictures are for Illustrative Purposes Only
GRU Stock Information:
PLUG DI, SJ
Stock Number Stock Description
000688223 4"
000514195 6"
000540773 8"
000130052 12"
'For GRU use only: An X indicates item is stockless
ASTM A536 - Ductile Iron
National Standards:
AWWA C110 - Full Body Fittings
NSF 61 - Water Systems
See Appendix A for Full Description of Standards
Water, Wastewater and Reclaimed Water
Material Standards
P-32.20
6/10/2009