WYNN 7.0 User Guide - Freedom Scientific

Step 1. Creating a PAL Document
88
Note: WYNN uses several new document formats, each with its own
extension. PAL files use WYP. Templates use WYT. Notecards use
WNC. WYNN files still use WYX. WYNN also supports earlier WYNN
file formats, including WYN, ARK, OBX, and OBU.
Saving a PAL File
1. If you have not already saved your material in PAL format, do that
now. From the File menu, select Save As. The “Select a file to Save
to” dialog box opens.
2. Type the name of the file in the File name box, and then select WYNN
PAL Documents (*wyp) in the “Save as Type” box.
3. Click Save.
4. The PAL panel opens and displays on the left side of the document
area. This is known as the left panel. If the PAL left panel does not
display at this point, go to the PAL menu and choose Left Panel.
Setting Up the PAL Document
After saving the document in WYP format, the next step is to begin the PAL
configuration.
Document Linking
1. In the PAL left panel, click the Document Linking button. This opens
the PAL Configuration dialog box with focus in the Document Linking
tab.
2. The current document (titled “This Document”) displays in the list.