WYNN 7.0 User Guide - Freedom Scientific

Camera View Group
Note: The Camera View settings only apply to the view from the PEARL
camera.
Camera View displays a real-time view from the PEARL camera; meaning that
as you move items around under the camera, such as turning pages or
removing and replacing objects, the image on the screen will update
accordingly. This is different from Exact View which only shows the image once
it has been acquired.
Default Zoom
Select the default zoom level used for Camera View. This setting persists
across WYNN sessions. Note that if you make a change, you must restart
WYNN before the new setting takes affect. The following options are available:
Page Width: Instantly zooms enough so the width of the image is in the
window. This is the default setting.
Page Height: Instantly zooms enough so the height of the image is in the
window.
Maximum Zoom Level: Zooms in for maximum magnification level.
Minimum Zoom Level: Zooms out to provide the minimum magnification
level.
Current Zoom Level: Sets the default zoom level to match the camera's
current magnification.
Overlay Color
To distinguish the part of the image that is to be acquired from the rest of the
image, WYNN displays an overlay rectangle. An overlay emphasizes a part of
an image by increasing the difference in brightness/contrast between it and the
rest of the image. The overlay rectangle is always displayed and moves as you
pan so the same portion of the image is always covered. If you change the
page size in the PEARL properties, or change how much of the image is
acquired in the Workflow Settings, the overlay will also change to reflect the
new settings. To change PEARL properties, open the Advanced menu, select
Device Selection, and then click Properties.
209