WYNN 7.0 User Guide - Freedom Scientific

210
Transparency
Use this slider to adjust the level of the overlay's transparency. Transparency
ranges from 0 to 100 percent.
Panning Properties
Line Wrap: Select this check box to automatically wrap to the next line
when you reach the right edge of the screen while panning in Camera
View mode. Otherwise, panning will stop at the right edge of the screen
when panning from left to right. This check box is selected by default.
Point Size: This option indicates the height of one line. If Line Wrap is
selected, this setting determines how far WYNN needs to wrap in order
to move to the next line. The default size is 10.
Line Delay (in seconds): Use this option to determine how long WYNN
should pause when wrapping to the next line. The default is one second.
Forward Speed: Select the panning speed to use when panning to the
right in Camera View. Choose a value from 1 to 20, with 1 being the
fastest. To pan forward, press WINDOWS Key+RIGHT ARROW.
Vertical Speed: Select the panning speed to use when panning up or
down in Camera View. Choose a value from 1 to 20, with 1 being the
fastest. To pan up, press WINDOWS Key+UP ARROW. To pan down,
press WINDOWS Key+DOWN ARROW.
Reverse Speed: Select the panning speed to use when panning to the
left in Camera View. Choose a value from 1 to 20, with 1 being the
fastest. To pan left, press WINDOWS Key+LEFT ARROW.
Customize Toolbar
To create a new toolbar containing only certain buttons that you specify,
choose Custom Toolbar from the Settings menu. You can have WYNN
display this toolbar instead of the standard rotating toolbars in order to provide
quick access to commonly used commands.