WYNN 7.0 User Guide - Freedom Scientific

Installation
Single-User and Non-Network Multi-User Installation
Important:
The procedures in this chapter assume that you can access the Internet
from your computer for software activation. If you do not have Internet
access, refer to Activation Options on page 237 for other activation
procedures.
Note: The single-user version uses the Authorization CD, while the Non-
Network Multi-User (NNMU) version uses Authorization numbers
printed on supplied labels.
Note: If you are installing the network version of WYNN, refer to Network
WYNN Installation on page 16.
Before You Begin
Verify the minimum system requirements (see page 8)
Verify that you have an Internet connection (required to activate your
software quickly using the Internet)
Determine if you are installing the Non-Network Multi-User or single-user
WYNN version versus the WYNN network version.
WYNN Installation Process
Important:
If you will be using the PEARL camera with WYNN, do not connect the
camera to your computer until the WYNN installation is complete. For
more information on connecting and setting up PEARL, refer to the
PEARL Quick Start Guide.
To install WYNN on your computer, do the following:
1. Insert the WYNN disk into your DVD drive.
11