WYNN 7.0 User Guide - Freedom Scientific

134
Once the launchables are set up, you can do the following:
To open WYNN files in a launchable application, refer to Using
Launchables in the next section.
To add more launchables, refer to Adding Launchables.
To change launchable settings, refer to Changing Launchable Settings.
To remove launchables from the Launch menu, refer to Deleting a
Launchable.
Using Launchables
To send a document from WYNN to a launchable application, do the following:
1. Open a WYNN document.
2. From the Launch menu, choose an application, such as Word, which
can be found at the bottom of the menu.
3. The selected application opens. Depending on the setting of the
Export Document check box, one of the following will happen.
If the check box is selected (the default setting), the current WYNN
document opens in the application. Note that a confirmation
messages displays if you have previously opened and saved the
document using the same launchable.
If the check box is cleared, the application launches, but does not
open the WYNN document.
Adding Launchables
To quickly add a launchable application to the Launch menu, do the following.
Note that for information about specific launchable settings, see Changing
Launchable Settings later in this chapter.
1. From the Launch menu, choose Manage Launchables and then
select Add.
The Add Launch Application dialog box opens.