WYNN 7.0 User Guide - Freedom Scientific

130
4. To continue changing zones on other pages of the acquired
document, press the Page Down key until the next page appears.
(The message “Loading Page” appears in the lower left corner.) Again,
the existing zones appear in blue.
5. Repeat step 2 and 3 to redefine the reading order for the next page.
Repeat this process for each page you wish to re-zone.
6. After defining new zones on all pages that apply, select the Re-
Process button. This tells WYNN to refresh the document using the
newly defined zoning order.
Document Clean-up (Correcting Text in an Acquired
Document)
Use the Document Clean-up feature to correct any scanning or recognition
errors that occurred during document scanning. This feature displays both the
Exact View and the Text View of the document so you can compare them.
This allows you to easily correct errors so that the text is spoken correctly in
either view.
To correct the text of an acquired document:
1. From the Advanced menu, choose Document Clean-up.
WYNN displays the Text View of the document in the top half of the
window, and the Exact View of the document in the bottom half of the
window.