PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
Page 169<br />
NOTE:<br />
The power from PW1 should support at least a 6.5A current for the P4 CPU. If<br />
the power output is too low, the CPU may not function normally. Be sure the<br />
power from the power supply is sufficient, and don’t share this power with other<br />
devices, such as hard disk etc. Use IEI’s special ATX power connector cable for<br />
connection to a power supply if the power supply doesn’t have a suitable ATX<br />
connector cable.<br />
B.19 Internal Switches and Indicators<br />
S2: Reset Switch<br />
PIN Description PIN Description<br />
1 Reset 2 GND<br />
B.20 Serial ATA Connector<br />
The POS-8520 provides two Serial ATA (SATA) ports.<br />
SATA1, SATA2: Serial ATA Connector<br />
PIN Description PIN Description<br />
1 S_TXP 3 S_RXN<br />
2 S_TXN 4 S_RXP
Change language