PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
Page 47<br />
NOTE:<br />
A jumper is a metal bridge that is used to close an electrical circuit. It consists<br />
of two metal pins and a small metal clip (often protected by a plastic cover)<br />
that slides over the pins to connect them. To CLOSE/SHORT a jumper means<br />
connecting the pins of the jumper with the plastic clip and to OPEN a jumper<br />
means removing the plastic clip from a jumper.<br />
The POS-8520 comes with fifteen jumpers (Table 3-1).<br />
Jumper Type Label<br />
Clear CMOS Setup 3-pin header JP1<br />
COM# RI and Voltage Selection<br />
3-pin header<br />
JP6<br />
JP7<br />
JP8<br />
JP9<br />
JP13<br />
JP14<br />
JP15<br />
JP16<br />
COM2 RS-232/422/485 Setup<br />
12-pin header<br />
6-pin header<br />
JP10<br />
JP20<br />
CompactFlash Card Setup 2-pin header JP12<br />
CPU Voltage Setting 10-pin header S3<br />
Keyboard/Mouse Power Source 3-pin header JP18<br />
LCD Voltage Select 6-pin header JP2<br />
Table 3-1: Onboard Jumpers
Change language