PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
D.1 Introduction<br />
The touch panel controller enables analog resistive touch panels for four-wire, five-wire &<br />
eight-wire models. The controller directly communicates with the PC system through the<br />
touch panel communications interface. The controller design is superior in sensitivity,<br />
accuracy, and friendly operation. The touch panel driver emulates the left mouse button<br />
and the right mouse button functions.<br />
The touch panel driver supports the following operating systems:<br />
• Microsoft Windows versions:<br />
o Microsoft Windows 95<br />
o Microsoft Windows 98<br />
o Microsoft Windows ME<br />
o Microsoft Windows 2000<br />
o Microsoft Windows NT<br />
o Microsoft Windows XP<br />
o Microsoft Windows XP Tablet PC Edition<br />
• Microsoft Windows CE versions:<br />
o Microsoft Windows CE 2.12<br />
o Microsoft Windows CE 3.0<br />
o Microsoft Windows CE. NET<br />
• Linux<br />
• IMac<br />
• DOS.<br />
Driver installation is described below.<br />
D.2 Driver Installation<br />
To install the touch panel software driver, please follow the steps below.<br />
Step 1: Insert the driver CD that came with the <strong>PPC</strong>-<strong>5190</strong> into the CD drive.<br />
Step 2: Once the CD drive is installed, the screen in Figure C-1 appears.<br />
Page 178
Change language