PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
Step 5: Tighten the screws that pass through the panel mounting clamps until the plastic<br />
caps at the front of all the screws are firmly secured to the panel (Figure 3-16).Step 0:<br />
Figure 3-16: Tighten the Panel Mounting Clamp Screws<br />
3.7.3 Rack and Cabinet Installation<br />
To mount the <strong>PPC</strong>-<strong>5190</strong> monitor into a rack/cabinet, please follow the steps below.<br />
Step 1: Secure the rack mounting bracket to two sides of the monitor using the supplied<br />
retention screws (Figure 3-17). Each bracket requires four screws.<br />
Step 2: Secure the rack mounting bracket to the rack by inserting and tightening the<br />
supplied mounting nuts and bolts (Figure 3-17). Each bracket requires three<br />
nuts and bolts for installation.Step 0:<br />
Page 64
Change language