PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
Step 4: Bundle the cables of the new PSU module and secure them with a plastic tie<br />
similar to the old PSU module.<br />
Step 5: Reconnect all previously disconnected power connectors to the motherboard<br />
and disk drives.<br />
Step 6: Reattach the elevated platform.<br />
Step 7: Replace the back cover.Step 0:<br />
4.6 System Cooling Fan Replacement<br />
Please read the warnings at the beginning of Section 4.3 before attempting to access any<br />
<strong>PPC</strong>-<strong>5190</strong> internal components.<br />
If the system cooling fans have been damaged, they must be replaced. To replace the<br />
system cooling fans, please follow the steps below.<br />
4.6.1 Remove the Old System Cooling Fans<br />
Step 1: Remove the back cover (Section 4.3.1).<br />
Step 2: Detach and remove the elevated platform (see Section 4.3.2).<br />
Step 3: Disconnect the system cooling fans from the motherboard (Figure 4-13).<br />
Figure 4-13: System Cooling Fans Motherboard Connector<br />
Page 78
Change language