PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
Page 71<br />
WARNING!<br />
PLEASE TAKE ANTISTATIC PRECAUTIONS WHEN WORKING WITH<br />
THE INTERNAL COMPONENTS. The interior of the <strong>PPC</strong>-<strong>5190</strong> contains<br />
very sensitive electronic components. These components are easily<br />
damaged by electrostatic discharge (ESD). Before working with the internal<br />
components, make sure all anti-static precautions described earlier have<br />
been observed.<br />
4.3.1 Back Cover Removal<br />
Please read the warnings at the beginning of Section 4.3 before attempting to remove the<br />
<strong>PPC</strong>-<strong>5190</strong> back cover.<br />
To access the panel PC internal components, the back cover must be removed. To<br />
remove the back cover, please follow the steps below.<br />
Step 1: Remove the <strong>PPC</strong>-<strong>5190</strong> from its mount (panel, wall, rack, arm, etc.).<br />
Step 2: The back cover is secured to the chassis with fourteen retention screws, eleven<br />
on the back cover and two on the bottom panel (Figure 4-1). Remove the<br />
retention screws and lift the cover off the <strong>PPC</strong>-<strong>5190</strong>. Step 0:
Change language