PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
Figure 3-9: CD Drive Blank Plate Assembly<br />
WARNING!<br />
The two screws (black M2*3) shown in the left image of Figure 3-9 are<br />
different from the two screws (silver M2*2) shown in the right. Please<br />
secure the correct screws into the CD drive according to the images shown<br />
in the Figure 3-9.<br />
Step 8: Slide the CD drive into the <strong>PPC</strong>-<strong>5190</strong> and align the two retention screw holes in<br />
the side of the CD drive bracket with the retention screw holes on the bottom<br />
panel.<br />
Step 9: Reinsert the two previously removed retention screws.<br />
Step 10: Connect the CD ribbon cable and the power cable from the connectors on the<br />
motherboard and the PSU to the rear of the CD drive. Figure 3-10 shows a<br />
properly installed CD drive.Step 0:<br />
Page 58
Change language