PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
Page 61<br />
3-12). Ensure that all four of the mounting screws fit snuggly into their respective<br />
slotted holes.<br />
NOTE:<br />
In the diagram below the bracket is already installed on the wall.<br />
Figure 3-12: Mount the Chassis<br />
Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective<br />
cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top<br />
panel of the panel PC. Carefully mark the location of the wall-mounting kit screw<br />
holes on the wall. Drill a pilot hole at the marked location on the wall. Secure the<br />
wall-mounting kit to the wall by inserting a retention screw into the pilot hole on<br />
the wall (Figure 3-13). This step is to avoid the panel PC being pushed apart<br />
from the wall-mounting bracket accidentally. Step 0:
Change language