PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
PPC-5190 User Manual - iEi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PPC</strong>-<strong>5190</strong> Flat Panel PC<br />
screw holes are shown in Figure 3-18.<br />
Figure 3-18: Arm Mount Retention Screw Holes<br />
Step 4: Secure the <strong>PPC</strong>-<strong>5190</strong> to the interface pad by inserting four retention screws<br />
through the mounting arm interface pad and into the <strong>PPC</strong>-<strong>5190</strong> flat panel PC.Step<br />
0:<br />
3.8 External Peripheral Interface Connectors<br />
3.8.1 LCD Panel Connection<br />
A conventional CRT VGA 15-pin female D-SUB connector is located on the bottom panel<br />
to connect the <strong>PPC</strong>-<strong>5190</strong> flat panel PC to a second monitor.<br />
NOTE:<br />
To use the dual screen option, please configure this option in the Intel® Extreme<br />
Graphics configuration settings. To do this, open the Control Panel, locate the<br />
Intel® Extreme Graphics icon and click on it. Once opened, an option for Multiple<br />
Display is available. Select this option and select notebook as the primary device.<br />
3.8.2 Ethernet Connection<br />
The two external peripheral interface RJ-45 connectors can be connected to an external<br />
LAN to provide Internet connectivity to the flat panel PC.<br />
Page 66