Setup and Assembling Bookeye 3 - Image Access Inc.
Setup and Assembling Bookeye 3 - Image Access Inc.
Setup and Assembling Bookeye 3 - Image Access Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
B.2.5<br />
Laser Check<br />
This function checks the integrity <strong>and</strong> position of the laser line. The function will return<br />
skew <strong>and</strong> relative position to its ideal values <strong>and</strong> is used to track potential misalignment.<br />
Start in the Adjustments & Support screen (Picture 52).<br />
Perform the measurement as follows:<br />
1. Find the section Focus & Scan Area Adjustments. Press the Laser Check button.<br />
Note:<br />
The position of the book cradles is verified. If the book cradles are not in the<br />
lowest (home) position a Retry button instead of the Next Step button <strong>and</strong><br />
a message is displayed on the screen.<br />
After moving the book cradles to the lower position press the Retry button.<br />
2. Place the White Reference Target 225x670 at the marked position.<br />
Picture 66: Laser Check screen<br />
3. Press the Next Step button. The measurement starts.<br />
Page 58<br />
<strong>Setup</strong> <strong>and</strong> Assembly Manual
Change language