digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC

Blank Search
Helps you find where you should start recording in
the middle of a tape to avoid time code interruption.
( pg. 21)
6 Rotate the MENU
Wheel to select
“BLANK SRCH”, and
press it. The Sub
Menu appears.
BLANK SRCH
BLANK SRCH
EN 23
– CANCEL
EXECUTE
Stop Button (8)
MENU Wheel
1 Load a cassette. ( pg. 16)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
(GR-DVX707/507 only)
3 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
4 Press the MENU
Wheel in. The Menu
Screen appears.
5 Rotate the MENU
Wheel to select
“t VIDEO”, and
press it. The VIDEO
Menu appears.
VIDEO/MEMORY Switch
(GR-DVX707/507 only)
Power Switch
PLAY
OFF
Lock Button
VIDEO
SYSTEM
DISPLAY
END
A
M
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
BLANK
SRCH
COPY
7 Rotate the MENU
5
Wheel to select
“EXECUTE”, and
press it.
BLANK SEARCH
● The “BLANK
SEARCH”
indication appears
blinking and the
camcorder automatically starts reverse or
forward search, then stops at the spot which is
about 3 seconds of tape before the beginning
of the detected blank portion.
● To cancel Blank Search midway, press 8.
NOTES:
● In step 7, if the current position is at a blank
portion, the camcorder searches in the reverse
direction. If the current position is at a recorded
portion, the camcorder searches in the forward
direction.
● Blank Search does not work if “HEAD CLEANING
REQUIRED. USE CLEANING CASSETTE” has
appeared with the tape.
● If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
automatically.
● A blank portion which is shorter than 5 seconds of
tape may not be detected.
● The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.
Slow-Motion Playback
Playback Zoom
Playback Special Effects
Available only with the remote control (provided).
( pg. 68, 69)