digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC
digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC
digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN 79<br />
Using The Camcorder As A<br />
WebCam (GR-DVX707 only)<br />
This camcorder can be used as a WebCam via USB<br />
connection.<br />
Open the<br />
connector cover.<br />
VIDEO/MEMORY<br />
Switch<br />
To USB<br />
1 Make sure all necessary software (provided) are<br />
installed in your PC and all units are turned off.<br />
2 Connect the camcorder to your PC using the USB<br />
cable.<br />
3 Set the VIDEO/MEMORY Switch to “MEMORY”.<br />
4 Set the Power Switch to “A” or “M” while<br />
pressing down the Lock Button located on the<br />
switch.<br />
5 Turn on the PC.<br />
● “Web CAMERA” appears on the screen.<br />
● If the PC is not<br />
powered on, the<br />
camcorder does not<br />
enter the Web<br />
Camera mode.<br />
6 When finished, turn<br />
off the PC first, then<br />
the camcorder.<br />
We<br />
b<br />
CAMERA<br />
Disconnect the USB cable from the camcorder<br />
and PC.<br />
NOTES:<br />
● It is recommended to use the AC Adapter as the<br />
power supply instead of the battery pack.<br />
( pg. 11)<br />
● Use the provided software PIXELA ImageMixer to<br />
capture <strong>video</strong> in real time.<br />
● You can also use the camcorder for web<br />
conference by using Microsoft Windows ®<br />
NetMeeting ® and signing up for MSN Hotmail.<br />
● In the Web Camera mode, the following buttons<br />
cannot be operated: E-MAIL, SNAPSHOT, the<br />
Recording Start/Stop Button.<br />
Refer to the instruction manuals of the PC and<br />
provided Software.<br />
P C<br />
USB cable<br />
(provided)<br />
To USB connector<br />
USB-equipped PC