16.03.2014 Views

digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC

digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC

digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

USER MAINTENANCE<br />

EN 91<br />

1 Turn off the camcorder.<br />

2 Slide down and hold OPEN/EJECT in the<br />

direction of the arrow, then pull the cassette<br />

holder cover open until it locks. The cassette<br />

holder opens automatically. Remove the cassette.<br />

3 Press “PUSH HERE” to close the cassette holder.<br />

● Once the cassette holder is closed, it recedes<br />

automatically. Wait until it recedes completely<br />

before closing the cassette holder cover.<br />

4 Slide and hold the BATT.RELEASE tab to the right<br />

1 and remove the battery pack 2.<br />

.<br />

After Use<br />

Cassette holder<br />

Remove.<br />

Cassette holder cover<br />

Cleaning The Camcorder<br />

1 To clean the exterior, wipe gently with a soft<br />

cloth.<br />

Put the cloth in diluted mild soap and wring it<br />

well to wipe off heavy dirt. Then wipe again with<br />

a dry cloth.<br />

2 Open the LCD monitor. Wipe gently with a soft<br />

cloth. Be careful not to damage the monitor.<br />

Close the LCD monitor.<br />

3 To clean the lens, blow it with a blower brush,<br />

then wipe gently with lens cleaning paper.<br />

4 Pull out the viewfinder fully.<br />

5 Open the viewfinder cleaning hatch in the<br />

direction of the arrow A.<br />

Insert a lens blower or soft cloth into the gap at<br />

the side of the viewfinder and clean the interior<br />

of the viewfinder with it B.<br />

6 Close the hatch until it locks in place and push<br />

the viewfinder back in.<br />

NOTES:<br />

● Avoid using strong cleaning agents such as<br />

benzine or alcohol.<br />

● Cleaning should be done only after the battery<br />

pack has been removed or other power units have<br />

been disconnected.<br />

● Mould may form if the lens is left dirty.<br />

● When using a cleaner or chemically treated cloth<br />

refer to the cautions of each product.<br />

PUSH HERE<br />

OPEN/EJECT<br />

Switch<br />

Hatch<br />

Lens blower<br />

BATT.RELEASE Tab

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!