digital video camera gr-dvx707 gr-dvx507 gr-dvx407 gr-dvx400 - JVC

EN 85
24. Although Snapshot is
attempted, flash does not take
place.
25. Although a Snapshot is taken
with the flash, Red-Eye
Reduction does not take place.
24. •The subject is too bright with
the flash set to “AUTO” or
“AUTO C”.
•If blinks, the flash is being
charged.
•The camcorder is in the
Record mode.
•In the Menu Screen, “GAIN
UP” is set to “OFF” or
“r PROGRAM AE” is set to
“TWILIGHT”.
25. •The subject does not look
straight toward the flash.
•The subject does not look at
the first flash, which is an
important part of Red-Eye
Reduction.
•The camcorder is too far
from the subject.
•“FLASH” is not set to
“AUTO C” in MANUAL
Menu.
24. •Set “FLASH” to “ON” in
MANUAL Menu.
( pg. 38, 47)
•It can take up to 10 seconds
to charge the flash.
•Set the camcorder in the
Record-Standby mode.
( pg. 53, 54)
•Set “GAIN UP” to
“AUTO ” or “ACG”
( pg. 38, 45) or disengage
the “TWILIGHT” mode.
( pg. 38, 42)
25. •The subject should look
straight toward the flash,
especially the first flash. If
the subject does not see the
first flash, it will be difficult
for Red-Eye Reduction to
take place. ( pg. 54)
•The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m from
the camcorder. ( pg. 54)
•Set “FLASH” to “AUTO C”
to display the Red-Eye
Reduction indicator.
( pg. 38, 54)
Other problems
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
26. The CHARGE indicator on the
camcorder does not light.
26. •The temperature of the
battery is extremely high/low.
•Charging is difficult in places
subject to extremely high/
low temperatures.
27. “SET DATE/TIME!” appears. 27. •The built-in clock’s
rechargeable lithium battery
is discharged.
•The previously set date/time
is erased.
28. There is no picture. 28. •The camcorder is not getting
power, or some other
malfunction exists.
29. Some functions are not
available using the MENU
Wheel.
30. Files stored in the memory
card cannot be deleted.
29. •The Power Switch is set to
“A”.
30. •Files stored in the memory
card are protected.
26. •To protect the battery, it is
recommended to charge it in
places with a temperature of
10°C to 35°C. ( pg. 88)
27. •Connect the camcorder to an
AC outlet using the AC
Adapter for over 24 hours to
charge the clock’s lithium
battery. ( pg. 15)
28. •Turn the camcorder’s power
off and on again. ( pg. 14)
29. •Set the Power Switch to “M”.
( pg. 14)
30. •Remove protection from the
files stored in the memory
card and delete them.
( pg. 31 – 33)
CONTINUED ON NEXT PAGE