download - Knoll

Worksurfaces, 1 3 /4
18D
Morrison
description type w d h pattern no. lam. V1 V2
Straight, 18D No grommets 30 17 5 /8 1 3 /4 MW2-S3018-B-( ) $347. $509. $716.
36 17 5 /8 1 3 /4 MW2-S3618-B-( ) 380. 546. 770.
42 17 5 /8 1 3 /4 MW2-S4218-B-( ) 419. 597. 858.
48 17 5 /8 1 3 /4 MW2-S4818-B-( ) 470. 646. 929.
54 17 5 /8 1 3 /4 MW2-S5418-B-( ) 503. 702. 1,001.
60 17 5 /8 1 3 /4 MW2-S6018-B-( ) 520. 733. 1,072.
66 17 5 /8 1 3 /4 MW2-S6618-B-( ) 576. 824. 1,196.
72 17 5 /8 1 3 /4 MW2-S7218-B-( ) 627. 915. 1,305.
Worksurface Planning
Order Code
Specification Information
Application Notes
Example: MW2-S3618-B-117
MW2 Worksurface 1 3 /4 thick
S Worksurface type
36 Width
18 Depth
B No grommets
117 Surface finish
B: Worksurface does not include
grommets
Specify surface finish
All worksurfaces are U.L.-listed.
18D worksurfaces are used
interchangeably in desk and panel
system applications as shallow main
surfaces, extensions, or credenza
tops. They must be supported at
each end by a pedestal, end panel,
end support cantilever or cantilever
bridging bracket with a maximum
span of 60 between supports.
All worksurfaces are 3 /8 less than
nominal depth for rear wire
clearance or privacy screens.
All worksurfaces have threaded
metal inserts at all end panel, desk
support and bracket locations and
pilot holes at pedestal locations.
MW2- worksurfaces are supported
by brackets with machine screws.
Panel supported worksurfaces over
60 must be mid-span supported by
MB2-C18 bracket, specified
separately.
18D worksurfaces with desk
supports or filler panels do not
accept pedestals.
103