download - Knoll

Brackets
panel planning
cantilever brackets
Morrison
description type w d h pattern no. list price
Cantilever brackets-C with machine screws 18D worksurface 1
/2 15 8 1 /2 MB2-C18M-(L/R)-( ) $53.
24D worksurface 1
/2 21 11 1 /2 MB2-C24M-(L/R)-( ) 61.
30D worksurface 1
/2 24 13 1 /2 MB2-C30M-(L/R)-( ) 72.
Cantilever brackets-C with wood screws 18D worksurface 1
/2 15 8 1 /2 MB2-C18W-(L/R)-( ) 53.
24D worksurface 1
/2 21 11 1 /2 MB2-C24W-(L/R)-( ) 61.
30D worksurface 1
/2 24 13 1 /2 MB2-C30W-(L/R)-( ) 72.
Cantilever tie-clips-AUX-C (10) – – – MB1-AUX-C 12.
Worksurface/vertical panel spacer-Y with
machine screws
1
/16 15 8 1 /2 MB2-YM-(L/R)-( ) 45.
Worksurface/vertical panel spacer-Y with wood
screws
1
/16 15 8 1 /2 MB2-YW-(L/R)-( ) 45.
Order Code
Specification Information
Application Notes
Example: MB2-C24W-R-612
MB2 Bracket
C Bracket type
24 Bracket depth
W Wood screws
R Left or right
612 Paint finish
Bracket type:
E- End support
V- VDT corner end support
C- Cantilever
Y- Worksurface/vertical
panel spacer
Specify paint finish.
C-type cantilever brackets support
worksurfaces from connector track
at the back. Specify left or right.
AUX-C cantilever tie-clips tie
together two adjacent cantilever
brackets for added stability.
Y-type spacer brackets secure the
end of pedestal-supported
worksurfaces to a connector track. Y
brackets maintain the 3 /8 wire drop
and allow pedestal fronts to align
with the end of the worksurface.
Brackets with machine screws
(suffix-M) are used with MW2- and
MU1- worksurfaces.
Brackets with wood screws
(suffix-W) are used with LU1- and
AWM2- worksurfaces.
156