download - Knoll

Worksurfaces, 1 1 /4
split top VDT corners
Morrison
description type w d h pattern no. lam. V1 V2
VDT corner Corner grommet only 41 5 /8 23 5 /8 1 1 /4 MU1-V42SS-A( ) $1,865. $2,070. $2,527.
47 5 /8 23 5 /8 1 1 /4 MU1-V48SS-A( ) 1,997. 2,201. 2,775.
47 5 /8 29 5 /8 1 1 /4 MU1-V48DS-A( ) 2,032. 2,284. 2,856.
VDT corner 3 grommets 41 5 /8 23 5 /8 1 1 /4 MU1-V42SS-C( ) 1,936. 2,140. 2,598.
47 5 /8 23 5 /8 1 1 /4 MU1-V48SS-C( ) 2,070. 2,272. 2,845.
47 5 /8 29 5 /8 1 1 /4 MU1-V48DS-C( ) 2,105. 2,357. 2,928.
Worksurface Planning
Order Code
Specification Information
Application Notes
Example: MU1-V48SS-A-117
MU1 Worksurface, 1 1 /4 thick
V VDT corner
48 Width
S Depth
S Split top
A Grommet
117 Surface finish
VDT Corner Depth:
S- 24D sides
D- 30D sides
Grommets/no grommets:
A- Grommets in back corners of
straight tops, one back
corner of VDT
C- Grommets in all three back
corners of VDT
Specify surface finish.
1 1 /4 VDT corners are solid core
construction with threaded metal
inserts at desk support and all
bracket locations. All worksurfaces
are U.L.-listed.
MU1- worksurfaces are supported
by brackets with machine screws.
Split top worksurfaces include
counterbalanced adjustable
keyboard/ mouse support with
fingertip control.
Front surface adjusts from 5 below
back surface to 7 above, and
adjusts in tilt from -10° to +10°.
Split top surfaces may be panel
supported or desk supported with
standard Morrison brackets.
Specify 18D cantilever brackets
with 23 5 /8 split corners, and 24D
cantilever or bridging brackets with
29 5 /8 D split corners.
48W split-top VDT corners must
be supported by VDT-end support
kits in conjunction with cantilever
brackets at side edges.
Corner worksurfaces with equal rear
edges have diagonal grain direction.
117