download - Knoll

Morrison Options worksurfaces, 1 1 /4
rounded end and conference shapes
Morrison
description type w d h pattern no. paint lam. V1 V2
30D rounded end No grommets 62 5 /8 30 1 1 /4 LU1-R6330B( )(L/R) $762. $1,162. $1,848.
No grommets 74 5 /8 30 1 1 /4 LU1-R7530B( )(L/R) 790. 1,204. 1,877.
Half round With vertical panel 30 50 3 /8 1 1 /4 LU1-R3050-B-( ) 561. 855. 1,279.
Teardrop 24 return 42 24 1 1 /4 LU1-T4224-B-( ) 583. 887. 1,325.
30 return 48 30 1 1 /4 LU1-T4830-B-( ) 747. 1,133. 1,694.
Support column 5 – 27 MM2-L26( ) 170.
Order Code
Example: LU1-R6330B-117-L
LU1 Options worksurface,
1 1 /4 thick
R Rounded end
63 Width
30 Depth
B No grommets
117 Surface finish
L Left hand
Specification Information
Grommets/no grommets:
B- worksurface does not include
grommets.
Specify surface finish.
1 1 /4 worksurfaces are 3-ply, solid
core construction.Plastic laminate
worksurfaces have radiused T mold
edge.
Rounded end worksurfaces have a
flat self-edge in the straight end.
LU1- worksurfaces are supported by
brackets with wood screws.
132
Rounded end worksurfaces are
specified left or right to determine
position of pedestal drilling.
Rounded end when seated at desk
defines L/R hand (Right hand
shown above). All worksurfaces are
U.L.-listed.
Application Notes
Rounded end worksurfaces may be
supported by 30 end support
brackets, 30 flat bracket or 30
conference end panel, and by a
support column at the rounded end.
Suspended pedestals may not be
used with 1 1 /4 worksurfaces.
Conference worksurfaces must be
supported by support column and
flat bracket or bridging bracket to
adjacent desk.
Half round with vertical panel
attaches to 24D straight or VDT
corner worksurfaces supported by
vertical panel.