download - Knoll
download - Knoll
download - Knoll
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Worksurfaces, 1 1 /4<br />
trapezoidal<br />
Morrison<br />
description w d h pattern no. lam. V1 V2<br />
Right hand - grommet 48 30/24 1 1 /4 MU1-T48A-R-( ) $627. $893. $1,248.<br />
54 30/24 1 1 /4 MU1-T54A-R-( ) 753. 1,072. 1,501.<br />
60 30/24 1 1 /4 MU1-T60A-R-( ) 877. 1,248. 1,749.<br />
72 30/24 1 1 /4 MU1-T72A-R-( ) 1,004. 1,430. 1,998.<br />
Left hand - grommet 48 24/30 1 1 /4 MU1-T48A-L-( ) 627. 893. 1,248.<br />
54 24/30 1 1 /4 MU1-T54A-L-( ) 753. 1,072. 1,501.<br />
60 24/30 1 1 /4 MU1-T60A-L-( ) 877. 1,248. 1,749.<br />
72 24/30 1 1 /4 MU1-T72A-L-( ) 1,004. 1,430. 1,998.<br />
Right hand - no grommet 48 30/24 1 1 /4 MU1-T48B-R-( ) 564. 804. 1,126.<br />
54 30/24 1 1 /4 MU1-T54B-R-( ) 690. 984. 1,373.<br />
60 30/24 1 1 /4 MU1-T60B-R-( ) 815. 1,159. 1,624.<br />
72 30/24 1 1 /4 MU1-T72B-R-( ) 939. 1,339. 1,874.<br />
Left hand - no grommet 48 24/30 1 1 /4 MU1-T48B-L-( ) 564. 804. 1,126.<br />
54 24/30 1 1 /4 MU1-T54B-L-( ) 690. 984. 1,373.<br />
60 24/30 1 1 /4 MU1-T60B-L-( ) 815. 1,159. 1,624.<br />
72 24/30 1 1 /4 MU1-T72B-L-( ) 939. 1,339. 1,874.<br />
Order Code<br />
Example: MU1-T48B-R-117<br />
MU1 Worksurface, 1 1 /4 thick<br />
T Trapezoidal worksurface<br />
48 Width<br />
A Grommets<br />
R Right hand<br />
117 Surface finish<br />
Specification Information<br />
Grommets/no grommets:<br />
A- worksurface includes 3<br />
grommet in each back<br />
corner.<br />
B- worksurface does not include<br />
grommets<br />
Specify surface finish.<br />
Right- and Left- hand are defined<br />
by applying trapezoidal tops as<br />
returns from rectilinear<br />
worksurfaces.R-Right hand<br />
30 D Left, 24 D Right edge<br />
L-Left hand<br />
24 D Left, 30 D Right edge<br />
All worksurfaces are U.L.-listed.<br />
114<br />
Plastic laminate worksurfaces are<br />
post-formed top and bottom, front<br />
and back. All worksurfaces are 3 /8<br />
less than nominal depth for rear<br />
wire clearance or privacy screens.<br />
1 1 /4 worksurfaces are 3-ply, solid<br />
core construction with threaded<br />
metal inserts at all end panel, desk<br />
support and bracket locations and<br />
pilot holes at pedestal locations.<br />
MU1- worksurfaces are supported<br />
by brackets with machine screws.<br />
Application Notes<br />
Trapezoidal worksurfaces are used<br />
interchangeably in desk and panel<br />
system applications. They must be<br />
supported at each end by a pedestal,<br />
end panel, end support, cantilever<br />
or cantilever bridging bracket with a<br />
maximum span of 48 between<br />
supports. Panel-supported<br />
worksurfaces over 48 must be<br />
mid-span supported by MB2-C18<br />
brackets, specified separately.
Change language