download - Knoll

Cascade edge worksurfaces
Half round and Corner round
Morrison
description w d h pattern no. solid woodgrain
Half Round 50 1 /4 notched for panel 18 1 1 /8 MCE1H4818P $461. $530.
60 1 /4 notched for panel 24 1 1 /8 MCE1H6024P 634. 731.
48 18 1 1 /8 MCE1H4818 461. 530.
60 24 1 1 /8 MCE1H6024 634. 731.
24D- RH Corner Round 24 24 1 1 /8 MCE1CR24R 245. 282.
24D- LH Corner Round 24 24 1 1 /8 MCE1CR24L 245. 282.
24D - Notched Corner Round 24 notched 24 1 1 /8 MCE1CR24N 245. 282.
Sample 12 12 1 1 /8 MCE1R1212G 132. 153.
Order Code
Specification Information
Application Notes
Example: MCE1H4818P-117
MCE1 Cascade edge
worksurface
H Half round
48 Width
18 Depth
P Notched for panel
117 Surface finish
Specify:
Finish:
Solid:
114 Folkstone Grey
117 Soft Grey
118 Bright White
119 Pumice
Woodgrain:
124 Medium Cherry
125 Natural Maple
126 Natural Cherry
127 Walnut
Cascade Edge worksurfaces are
wrapped with a pvc free, 3D
laminate sheet heated and pressed
around an FSC certified substrate.
3D laminate is more susceptible to
denting, impact, tearing and
marring than conventional high
pressure laminate and should be
handled with care. Do not drag
worksurfaces across any flooring
surface. Treat Cascade Edge
worksurfaces like veneer
worksurfaces for optimum
performance under normal
conditions. Cascade Edge
worksurfaces have a 10 year
warranty that covers defects in
workmanship and materials. This
warranty does not cover damage
occurring during or after
installation.
Cascade Edge worksurfaces are are
not drilled for wire management
clips, pedestals or brackets.
Worksurfaces are 1 /16 less than
nominal width and 3 /8 less than
nominal depth for rear wire
clearance.
Worksurfaces require support every
48 in width. All supporting
hardware is ordered separately.
Half Round:
Half round worksurfaces may be
supported by cantilever bridging
brackets in conjunction with a
rounded end support column.
Corner Round:
Notched corner round worksurfaces
are supported by cantilever bridging
brackets on both side edges.
End run Left- and Right-handed
corner round worksurfaces are
supported by a combination of an
end bracket along the panel edge
and a cantilever bridging bracket to
the adjacent worksurface side edge.
Cascade Edge worksurfaces are for
panel-based planning only and
cannot be used in conjunction with
Network desk supports.
Order Morrison brackets with wood
screws ( suffix -W ).
148